- Διαθεσιμότητα: ΔΙΑΘΕΣΙΜΟ
- Κωδικός: IKEGAMI HC-200 + IR-S420CE
- MPN: IKEGAMI HC-200 + IR-S420CE
For Sale USED Vintage IKEGAMI HC-200 + IR-S420CE SVHS Recorder
“It works like new. The only issue is that the viewfinder needs repair.” With original tripod plate, original hard case and original Mic (It doesn't show in the photos)
The rarity of this camera lies in the fact that, although Ikegami is a professional broadcast camera manufacturer, this particular model operates with an S-VHS video recorder — something I have not encountered before in my 25 years of involvement with historic broadcast equipment..
About
The Ikegami's HC-200 is a compact, lightweight, high-class 3 CCD color camera for ENG and EFP. Its design incorporates an efficient 1/2-inch CCD which ensures high performance, ease of operation and high stability as well. The HC-200 is an extraordinary multi purpose color camera. It features a quality picture with low smear, CCD precision fixing technique, low-noise preamplifier and highlight compression. It also provides a variety of high-accuracy automatic controls by a microcomputer. Further, it has a character display on the viewfinder, including a highly effec- tive status display to prevent error operation. The camera can be used in conjunction with S- VHS portable VCR directly. It ensures easy on-board VCR operation. The HC-200 is provided with a full-line of accessories. It allows for a wide variety of services, including the connection of y / C separate output signal for S- VHS and the connection of a VCR com- ponent signal type for use of a BETACAM and M II, as well as services of ENG and EFP.
Features
- 3 CCD
The HC-200 uses a high-efficiency CCD and a number of advanced video circuits. It assures a horizontal resolution of 530 lines or more and a signal-to-noise-ratio of higher than 58dB. It can be used in illumination as low as 20 lux minimum for f1.4 with +18dB gain. The CCD greatly reduces vertical smear, moire, ringing and fixed-pattern noise, thereby providing a high-quality picture. - Electronic Shutter
The HC-200 has an electronic variable shutter that not only allows you to shoot a subject moving at a high speed, but it also removes fluorescent light flicker by" using 1/100 or 1/120 sec shutter speed. - Auto-knee
Improves the contrast handling capability under any amount of incident light. - Comprehensive Design for Combined Use
The S-VHS and S-VHS-C VCR can be directly connected to the camera head for easy use as a combined VCR-camera. Op- tional adapters allow the camera to integrate with a BETACAM VCR. Even with the VCR connected, most of the camera func- tions, such as remote control still work with on-board VCR. - Allowance for Various VCRs
The HC-200 can have a y /C separate output and component signal output (option) .These features allow for connection with many VCRs, including S-VHS, BETACAM, MIl and U-matic as well. - Microcomputer Control
The microcomputer incorporated provides many accurate con- trol features so the camera can be in good working condition without annoying adjustments. - Efficient 1.5-inch Viewfinder
The built-in 1.5" viewfinder with high-resolution CRT provides a clear, stable picture. It has a visual control and positioning feature to adjust for each cameraperson. The viewfinder can face upright for easy carrying of the camera head. - Low Power Consumption
The camera adapter with a 1.9Ah battery allows the camera to run for more than 1 hour. - Lens Compatibility
The lens mount is a standard 1/2-inch mount that provides compatibility with many lenses such as HC-230s. - Microphone
The low-noise AGC amplifier incorporated can automatically control gain from the microphone for optimum level recording.
Specifications
| Optical System: | RGB prism beamsplitter, F1.4 |
| Lens Mount: | Bayonet mount (same mount as HC-230) |
| Optical Filter: | 3000°K/5600°K+ND(125%)/5600°K/EFFECT |
| Image Device: | IL, 1/2" 3-chip CCD |
| Effective Number of Pixels: | Approx 250,000 pixels (H 510 x V 492) NTSC Approx 290,000 pixels (H 500 x V 582) PAL |
| Nominal Imagjng Area: | H 64 x V 48 mm (1/2" type) |
| Shutter Speed: | 1/100, 1/500, 1/1000 NTSC 1/120, 1/500, 1/1000 PAL |
| Scanning System: | 2:1 interlaced 525 lines, 60 fields/30 frames/sec NTSC, 2:1 interlaced 625 lines, 50 fields/25 frames/sec PAL, |
| Sync System: | NTSC or PAL Internal sync operation with built-in sync generator (in accordance with RS-170A/NTSC) or External sync driving (genlock) switchable automatically |
| Encoding System: | I/Q NTSC U/V PAL |
| Aspect Ratio: | H4:V3 |
| Horizontal Resolution: (at y channel) | 530 lines or better (at center) |
| Signal-to-Noise Ratio: | 58 dB NTSC 56 dB PAL (p-p/rms, Detail & Gamma OFF, Encoded out, measured by ROHDE & SHWARZ noise meter) |
| Illumination: | (a) Minimum 20 lux at F1.4/3000°K (89.9% reflectance, +18 dB gain) (b) Standard 2000 lux at F5.0/3000°K (89.9% reflectance) |
| Gain Selection: | 0 dB/ +9 dB/ +18 dB |
| Shading Correction: | Shading correction is performed by vertical and horizontal correction circuits (Black & White Shading) |
| Flare Compensation: | Compensates for individual channels |
| Highlight Compression: | Auto knee |
| Detail Correction: | (a) Horizontal Dual edged (with comb filter) (b) Vertical Dual edged (2H) |
| Color Bar: | Split field type (RS-189A) NTSC Full field type PAL |
| Registration Error: | Within 0.05% (entire picture area) |
| Automatic Functions: | Auto White Balance (with 2 memory channels and 1 preset channel) Auto Black Balance and Level Auto Iris (with counterlight compensation switch) |
| Input Signal: | Genlock Input (BNC Conn) VBS 1.0 Vp-p/75 ohm, or BBS 0.45 Vp-p/75 ohmReturn Video Input (26 pin Conn) VBS 1.0 Vp-p/75 ohmMIC Input (XLR type, 3 pin Conn) -60dBm 600 ohm |
| Output Signal: | Video Output (BNC type, 26 pin Conn) VBS 1.0 VP-p/75 ohm, 2 ChannelsY /C Output (26 pin Conn) Y 10 Vp-p/75 ohm C 0286 Vp-p/75 ohmComponent Output (26 pin Conn) (Option) Y 10 Vp-p/75 0 R-Y 07 Vp-p/75 ohm B-Y 0.7 Vp-p/75 ohmRGB Output (26 pin Conn) (Option) V 0.7 Vp-p/75 ohm SYNC 25 Vp-pAudio Output (26 pin Conn) -60 dBm. 600 ohm balanced, or -20 dBm 600 ohm unbalanced, with AGC (Selectable) |
| Intercom: | Built-in with Camera Adapter |
| Power Requirements: | DC 12.0 V (nominal) |
| Power Stability: | Stable operation is assured if the voltage is within 11V to 17V |
| Power Consumption: | Approx. 9.0 W (excluding VF) Approx. 11.5 W (inchJding 15" VF) |
| Operation Temperature: | -10°C- +45°C |
| Dimensions (WHD): | 1075 x 264 x 283 mm (including Head and Camera Adapter) |
| Weight: | Approx 3.0 kg (Head 2.5 kg, Camera Adapter 0.5 kg) (excluding VF, lens, and battery) |
