Parameters:- TTL Manual Multi Modes HSS Flash Trigger+Receiver 1/8000s For Canon- Frequency: 2.4GHZ- Distance: 100m+- Channel: 4 chanels- Group: 3 groups(a,b,c)- Battery: 2 x AA batteries- Maximum synchronous speed: 1/8000 sec- Output: Support PC and Hot shoe trigger- Input: USB port(transmitter and..
Support for Nikon's I-TTL.The splitter doubles the hot shoe for your camera / camcorder.Also can trigger other types of speedlite and camera,such as for Nikon / Pentax / Olympus.Can bear objects which weights up to 3 KG, increases the service life of your hot shoe.Made of ABS & PC, makes it lightwei..
This cable has a shoe mount on the bottom of the flash connection shoe, as well as a 1/4"-20 socket.Specifications:Cable Unstretched length: 0.5m(1.6ft )Dimensions (L x W x H)Camera connector: 39.3x29.5x27mmFlashlight connector: 39.1x29.5x23.5mmPackage includes:DSLRKIT TTL-N(3Meter) TTL Flash Cable..
Support 1/8000s high speed synchronization support TTL exposure compensation, Manual Multi Modes.
Parameters:- TTL Manual Multi Modes HSS Flash Trigger+Receiver 1/8000s For Nikon- Frequency: 2.4GHZ- Distance: 100m+- Channel: 4 chanels- Group: 3 groups(a,b,c)- Battery: 2 x AA batteries- Maximum ..
1. With three PC sync terminals bridged, the sync cord can trigger two external flashes with PC sync portsimultaneously through the camera’s PC output port or the flash trigger’s.2. The bridge is soldered with built-in PCB board, avoiding sealing off or disconnection caused by long time use.3. Each..
Features:Professional spring PC sync cable,can be extended to 1.5M. The material of the port is copper with gold plating,ti has a very good contact and never oxidated.It has a screw lock, so the cable can be locked with the pc socket of the camera.Cable Unstretched length: 0.32m(1ft)Cable Max strech..
Meike SD-8A is powered by 6 AA or standard batteries. It should be said, that flash has to be charged as well, battery pack provides only additional charging. We recommend to use the same batteries both in battery pack and the flash. Red LED diode informs that the flash is being charged from the bat..