Brand: PhotoCame
Code: LCPC41
- With this adapter, you can Mount Canon FD Lenses on Micro 4/3 Olympus Panasonic Cameras Body.- There are no electrical contacts in the extension tubes. Exposure has to be adjusted manually.- Infinity focus is guaranteed by Manual setup.- All-metal design, hardened anodized aluminum construction.- ..
Out Of Stock
Code: LHPC01
Description:Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.Features:Protect the l..
Out Of Stock
Brand: PhotoCame
Code: M42FD
Features:Focusing infinity, No ROM connection on the adapter.Diaphragm control of the lens is set manually.Automatic diaphragm, auto-focusing, or any other functions will not operate correctly while using this adapter.'Stop-down mode' will need to be used when metering since the lens does not have t..
Code: LCPC30
Made by metal with very high qualityThe UNC (Unified National Coarse Thread) is 1/4"Ring diameter: 80mmRing thickness: 4.5mmColor: blackWeight: 185g..
Code: LCPC01
This cover fits 49/52/55/58/62/67/72/77/82mm front thread Nikon or Canon lenses or any Lens with a 49/52/55/58/62/67/72/77/82mm diameter Filter Mount.The Snap-Cap utilizes a Center Pull locking system for convenient attachment or removal -easier to use than caps with outside push buttons.With "Nerve..
Out Of Stock
Code: RSA03
The Lens Support is made of hign aluminum. You can vary the height of the support by the adjustable knob in the middle, until it meets the lens. Standard 15mm diameter 60mm distance between holes rail rod clamp allow you to mount it on rails of any 15mm rail rig. The arc interface comes with the rub..
Out Of Stock
Code: LCPC01e
Protection Lens, Fit for All "SONY E-Mount " Mount LensThis set of body cap and rear lens cap made of high quality material, fits for all "SONY E - Mount" Mount, the functions and size is same as the Original products.Specification:*Rear lens cover with body Cap, fits all SONY E-Mount's digital ..
Code: LHPC40
Features:Satisfying the needs of professional photographers for high-end shooting.It can be applied to various cameras with manual white balance function.Universal thread interface is compatible for various mount lens.52mm, 58mm, 62mm, 77mm, 82mm, 55mm sizes are prepared for your cameras.Equipped wi..
Out Of Stock
Code: LCPC01b
Specification:Rear lens cover with body Cap, fits all Nikon or Canon film and digital SLR. Same sizes and same functions with the Nikon"s & Canon Camera.The purpose of Rear lens cap is to keep dust, dirt, fingerprints, and moisture off your lens after you removed the lens from camera. The camera bod..
Showing 1 to 9 of 9 (1 Pages)